Sdc 295 Programmable Cabinet Lock User Manual download pdf

801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • Fax: (805) 494-8861

www.sdcsecurity.com • E-mail: service@sdcsecurity.com

INSTALLATION INSTRUCTIONS

Model 295 – Programmable Cabinet Lock

Ideal for new installations, or a quick retrofit for keyed cam

locks

Suitable applications include: cabinets, cupboards, medical

carts, lockers, etc.

Keypad with 12 individual buttons (0-9, C, #)

Easily programmable codes:

1 Master Code, 1 Sub-master Code, & 30 User Codes

Configurable code length – 4 to 6 digits

Three Operation Modes available:

Multiple User mode, Code Free mode, &

Single Use mode (locker mode)

15,000 operations on 2 x AAA batteries (included)

Non-volatile memory

Battery failure override using a 9V battery and Master Code

Technical Information:

Door Thickness: up to 3/4"

Cam mounting: 3/4" square spindle

Hole required for spindle: 11/16" diameter

Batteries: 2 x AAA Alkaline (included)

Parts Included:

Cabinet Lock w/ key cylinder and spindle

Lock mounting screw & lock washer (x 2)

Cam, cam mounting screw & lock washer

Keys (x2)

Installation instructions & template

Replacing an existing cam lock with the Cabinet Lock:

1. Remove existing cam lock.

2. Place supplied template over the existing hole. Align the 11/16" spindle hole on the template with the hole left by cam lock. Mark

the upper & lower mounting holes.

3. Drill the two 3/16" mounting holes.

4. Cut the mounting screws to correct length. Measuring from beneath the bolt head, the length should be the cabinet thickness, plus

approx. 5/8".

5. Mount the cabinet lock to the door using the supplied lock washer & mounting screws.

6. From the inside of the door select and attach the appropriate cam using the supplied cam mounting screw & washer.

7. Before closing and locking the door, test the operation of the lock using the default Master and User Codes (See Basic

Operation on page 2).

8. It is recommended that the default Master and User Codes be changed at this time (See Quick Start Programming on page 2).

New installations:

1. Place the supplied template on door and mark the upper and lower 1/4" mounting holes and the 5/8" spindle hole.

NOTE: Before drilling fixing holes, verify that the position of the Cabinet Lock when fitted will allow enough clearance for the cam to

work.

2. Drill all three mounting holes.

3. Continue the installation from steps 4 though 8 above.

Features & Applications

Installation

Any suggestions or comments to this instruction or

product are welcome. Please contact us through

our website or email [email protected]

P:\INSTALLATION INST\Access Controls\INST-295\INST-295.vsd REV C 10-13 Page 1

1 2 3 4 5

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 • Fax: (805) 494-8861www.sdcsecurity.com • E-mail: [email protected]

Page 2 - Programming Overview

Operational NotesThe 295 can store 1 Master Code, 1 Sub-Master Code, and up to 30 User Codes (ID Number 01 through 30). Codes may be 4, 5, or 6 digits

Page 3

Advanced ProgrammingEnter Programming ModePress # 12345 B BLEDBefore any function is performed, you must first Enter Programming Mode. NOTE: It is im

Page 4

Function 13: Hold Open (Code Free Mode)Press 13 13 BLEDB BLED{The unit is continuously unlocked}Function 14: Cancel Hold OpenPres

Page 5 - Installation

5.2002X 3/16" diameter11/16" diameter11/16"P:\INSTALLATION INST\Access Controls\INST-295\INST-295.vsd REV C 10-13

Comments to this Manuals

No comments

Sdc 295 Programmable Cabinet Lock User Manual

Browse online or download User Manual for For Home Sdc 295 Programmable Cabinet Lock. SDC 295 Programmable Cabinet Lock User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For Home Sdc 295 Programmable Cabinet Lock